Basic ALP system reset losing some counter stats ?

deanoobaby

PSL +5
Intermediate User
Joined
Feb 6, 2012
Messages
1,914
Reaction score
1,373
Location
australia wa
For example memorise sensor location installing other heads changing there location senario

only noticed this on recent install and latest update as recent last hit was my ultralyte

my poliscan count hasnt changed but just wondering why other counters reset every time i do a basic reset

also my poliscan count seems a bit low it looks jammed it been stuck on 29 for some time



Device information
Serial number4623730
CPU Hardware version2
Firmware version5.5.8
RegionAustralia & Pacific
Power Cycles1393
Control Set FW version5.9
Control Set HW version2
Activated locksnot active
Hardware version2
Connected sensors
Connected sensors (memorized)Front1, Front2, Front3
Connected sensors (actual)Front1, Front2, Front3
Connected TX sensors (stored)
Connected TX sensors (actual)
Alerts by Source Speed-laser
Marksman and UltraLyte0
Atlanta SpeedLaser Stealth0
Kustom ProLaser 10
Kustom ProLaser & ProLite0
Redspeed SpeedGuard0
Riegl0
Stalker0
LTI Truspeed0
Unipar - SL7000
NJL SCS 101 & 1020
Jenoptik – Laveg0
Leivtec XV 20
Leivtec XV 30
Laser Ally0
Cam S10
ARH TrafficSpot0
Error Sensitive Lasers
Jenoptik LaserPatrol0
Jenoptik TraffiPatrol XR0
ProLaser 2 & Atlanta SpeedLaser0
Stalker XLRr0
Speed Section Control
Camea - IR Camera0
Speed Scanner
Traffic Observer1
Vitronic Poliscan29
Radar
K-band0
Ka-band0
X-band0
POP0
MultaRadar CD0
Last alert ID
Last laserULTRALYTE
Last radar
Last error2 - Check sensor connection, sensor error or laser interference in vicinity. Error may be neglected if it does not happen too often.
Last warning3- USB setup in progress (Data stored)
Faulty radar ID
Post automatically merged:

just to add had some random gps port falses on start up considering i have never had a gps unit installed
 
Last edited:

thebravo

Security
ModSec
Premium Plus
Lifetime Premium
Corgi Lovers
Advanced User
Joined
Dec 31, 2016
Messages
7,785
Reaction score
19,091
Location
FL (formerly CT)
I know one of the more recent software updates wiped the gun stats off the system. After the last update did you reset, rememorize and create a new config? the new config I believe has a GPS receiver present option, make sure that is turned off otherwise the system may look for it on startup.
 

BestRadarDetectors

Manufacturer
Lifetime Premium
Advanced User
Manufacturer
Joined
Oct 17, 2011
Messages
12,831
Reaction score
33,312
A few updates back memory allocation changed which forced a reset of stats history. A factory reset in the menu should not change any of your stats.
 

deanoobaby

PSL +5
Intermediate User
Joined
Feb 6, 2012
Messages
1,914
Reaction score
1,373
Location
australia wa
A few updates back memory allocation changed which forced a reset of stats history. A factory reset in the menu should not change any of your stats.

Gday tom
i have just used my ultralye and pl2 here is my last 2 stats ( take note my power cylce count hasnt changed it apears stuck )

my poliscan counter may also be stuck but i will confirm that a bit later





Serial number
4623730
CPU Hardware version2
Firmware version5.5.8
RegionAustralia & Pacific
Power Cycles1398
Control Set FW version5.9
Control Set HW version2
Activated locksnot active
Hardware version2
Connected sensors
Connected sensors (memorized)Front1, Front2, Front3
Connected sensors (actual)Front1, Front2, Front3
Connected TX sensors (stored)
Connected TX sensors (actual)
Alerts by Source Speed-laser
Marksman and UltraLyte2
Atlanta SpeedLaser Stealth0
Kustom ProLaser 10
Kustom ProLaser & ProLite0
Redspeed SpeedGuard0
Riegl0
Stalker0
LTI Truspeed0
Unipar - SL7000
NJL SCS 101 & 1020
Jenoptik – Laveg0
Leivtec XV 20
Leivtec XV 30
Laser Ally0
Cam S10
ARH TrafficSpot0
Error Sensitive Lasers
Jenoptik LaserPatrol0
Jenoptik TraffiPatrol XR0
ProLaser 2 & Atlanta SpeedLaser2
Stalker XLRr0
Speed Section Control
Camea - IR Camera0
Speed Scanner
Traffic Observer1
Vitronic Poliscan29
Radar
K-band0
Ka-band0
X-band0
POP0
MultaRadar CD0
Last alert ID
Last laserMARKSMAN OR ULTRALYTE
Last radar
Last error2 - Check sensor connection, sensor error or laser interference in vicinity. Error may be neglected if it does not happen too often.
Last warning3- USB setup in progress (Data stored)
Fault




i have just perfomed a basic reset through the menu (RESTORE TO DEAFAULT MEMORISE SENSORS )

i have lost my marksman count even though it says its there in my last laser ? also the power cycle is still jammed on the same 1398





Serial number4623730
CPU Hardware version2
Firmware version5.5.8
RegionAustralia & Pacific
Power Cycles1398
Control Set FW version5.9
Control Set HW version2
Activated locksnot active
Hardware version2
Connected sensors
Connected sensors (memorized)Front1, Front2, Front3
Connected sensors (actual)Front1, Front2, Front3
Connected TX sensors (stored)
Connected TX sensors (actual)
Alerts by Source Speed-laser
Marksman and UltraLyte0
Atlanta SpeedLaser Stealth0
Kustom ProLaser 10
Kustom ProLaser & ProLite0
Redspeed SpeedGuard0
Riegl0
Stalker0
LTI Truspeed0
Unipar - SL7000
NJL SCS 101 & 1020
Jenoptik – Laveg0
Leivtec XV 20
Leivtec XV 30
Laser Ally0
Cam S10
ARH TrafficSpot0
Error Sensitive Lasers
Jenoptik LaserPatrol0
Jenoptik TraffiPatrol XR0
ProLaser 2 & Atlanta SpeedLaser2
Stalker XLRr0
Speed Section Control
Camea - IR Camera0
Speed Scanner
Traffic Observer1
Vitronic Poliscan29
Radar
K-band0
Ka-band0
X-band0
POP0
MultaRadar CD0
Last alert ID
Last laserMARKSMAN OR ULTRALYTE
Last radar
Last error2 - Check sensor connection, sensor error or laser interference in vicinity. Error may be neglected if it does not happen too often.
Last warning3- USB setup in progress (Data stored)
Faulty radar ID
 

BestRadarDetectors

Manufacturer
Lifetime Premium
Advanced User
Manufacturer
Joined
Oct 17, 2011
Messages
12,831
Reaction score
33,312
Tried to PM you but it wont let me. Do you have PM's disabled?

Sent from my SM-G975U1 using Tapatalk
 

Discord Server

Latest threads

Forum statistics

Threads
97,635
Messages
1,482,582
Members
24,734
Latest member
itfitz
Top