I just saw where this can be used on the CR97. Is anyone using it/thoughts? It would be great if the button worked like the one on the R3. Thanks
Thanks for the reply. My reason is I'd like to at least be able to mute on the occasion the detector seems to lock on a freq and does not let go right away. Reaching to the detector is more of a reach then I like just to mute which I would use a lot till I find a setting to were the detector is not always going off.
I have had generic Ka (no frequency) "latching on" at full strength, in addition to K.I agree as I wish Whistler would have more involvement in the forum. Another firmware update soon would be good too. I had to power cycle mine last night as it latched onto a K band signal for several minutes. Fortunately it hasn’t been a persistent issue for me, but it does happen occasionally. On a side note, the other day I thought my detector was latching onto signal after passing an officer running 35.5, but shortly after I (within a mile or 1.5 miles I encountered another officer running 35.5) as it was obvious to me from the signal ramp up, so I always look around a lot to make sure there isn’t something else out there causing my CR97 to keep alerting. Most of my “latching on” issues have involved K-band signals.
Sent from my iPhone using Tapatalk