Feel free to adhere to the request by johnboy in his jbv1 section, but as far as everywhere else on the forum goes, it's just really unnecessary and actually detrimental to certain functions on RDF.Good enough for me then. I was trying to be respectful to the behaviors I was observing. I'll stop obscuring "Waze".
Phooey, I was looking to downgrade! I have messed with all of the likely settings options, to no avail.- I apologize. I probably misspoke about that. I had seen it mentioned in older posts, but I don’t have any experience with it or know if it’s even a viable option.
( I just changed my original post). FWIW, I have the latest version of Waze ( 18.104.22.168) installed on my Android and I haven’t experience the auto zooming.
I use 3d mode zoomed out to around 2 miles forward visibility. That allows me to glance at it occasionally and see if there are any Police pins showing up. They show up way before the voice announcements do. I adjusted it once and haven’t touched it since. It stays at that zoom level. I also use mine strictly in map mode. I don’t program any routes.
Are there any other settings you can mess with to see if it helps ?
It's not constant zoom level, but I find that in 3d mode, there is significantly more view ahead even when stopped.Phooey, I was looking to downgrade! I have messed with all of the likely settings options, to no avail.
I run exclusively in 2D/map mode, never in 3D head up mode., I'm an old paper map guy and 2D map mode keeps me aware of my location on the surface of the earth in relation to other intersections, interchanges, cities and towns, and not just a view down the road in front of from me.
Either way, I am still looking for some way of holding the zoom level constant. Otherwise Waze is nearly dead to me. I run it in background now, listening for reports about upcoming hazards, but no longer being a crowd sorceer, i.e. not dropping pins, or grading others pins anymore.
Based on what I'm experiencing, this sounds like an iOS issue at the moment. I've not experienced any changes in view / zoom behaviors.
I just pinged our IT guru who told us to hold off on 12.1.4 due to reported connectivity issues. I shall have to stick with 12.1.3 until I receive the all-clear.Well, "THERE's your problem!"
Apple iPhone 8 plus
Waze release 22.214.171.124 (the most recent version that I can find on iTunes).
I'll add that the zoom level fluctuates depending on my speed. Stop at an intersection and it zoom in to cover only about a 100 yard radius.
Accelerate from a standing start and Waze zooms out as my speed increases, topping out at interstate speeds, where I only get a view of about the next 1,000 feet ahead. If I manually increase the radius of the view around my vehicle and hold my speed steady, that zoomed out view lasts for about 10 seconds, then it automatically zooms back in to give me only the 1,000 feet ahead. FRUSTRATING! The constant automatic zooming in and zooming messes with my sense of scale. It takes time to calculate how far ahead a hazard is. It also denies me info about things going on a few thousand yards ahead...soon enough to actually detour around a bad situation.
I keep taking my hand off the wheel and messing with the phone screen every 10 or 20 seconds to keep the wide-area view I find useful and like. Knowing this is hazardous, I end up just shutting Waze off..
Thanks for your interest.
Thanks much. I'll give your suggestions a try, but my only change from what I have now is the ad preference setting.And I assume you are running directly on the phone and not to a Head Unit using Apple Car Play?
My setting are:
General: Prevent Auto Lock - On
Ads Personalization OFF
Under Display & Map - I actually have Auto Zoom - ON - but it seems to only Zoom In (makes map larger so I can see farther out after I exceed 80)
Show Zoom Controls - OFF
These action are on my DMX-905S head unit using Apple Car Play. I have no pop up ads and the only map scale movement seems to be when I have come to a complete stop, then when driving I would say it goes normal, then over 80 it shows me more map I guess because I am gobbling it up quicker.
It's a great free way to add a layer of protection. No reason not to use it.
How do you downgrade? I went to the latest version and I cannot stand the auto zoom function.
With previous versions, I kept the field of view fixed at about a four mile radius so that I had wide-area situational awareness. With the latest version, the damn auto zoom zooms the view in so close, giving you such a short view of the road ahead, that you don't learn about something until you're nearly on top of it.
When you're on an interstate, it does no good to find out about a traffic jam after you've gone past the last exit that could provide a detour around it.
This one change to auto zoom has taken Waze from what used to be a pretty serious and useful aid to navigation down to that of some kind of toy.
Epilogue:Thanks much. I'll give your suggestions a try, but my only change from what I have now is the ad preference setting.
My goal is ZERO auto-changes in zoom, whether I am at top speed or drawing to a standstill.
It's ironic that when I draw to a stop, I don't want zoom, I want max distance so I can determine at a glance whether I should change my route on the fly.
Indeed. The constant auto zoom that I was unable to turn off started when I downloaded and installed version 1.47. That's why I think the app was corrupted during the download/install process.To add complexity to your fix; there is indeed and auto-zoom function and has been for at least 5 years.
Perhaps yours was corrupt and not working correctly.
I use Waze pretty consistently. I started using it before Google bought because of the traffic data. Knowing where accidents are ahead of time saves me a headache.
Do you use the latest version, or did you hang on to the pre-Google version? I still don't use it, but I read comments about it, and many folks don't seem to like the newer versions as much.