Which of these two 3d printed RX sensor holders with laser inserts, will be better?

matt8119

Learning to Drive
General User
Joined
Jul 26, 2018
Messages
16
Reaction score
9
im looking to install laser mounts for my RX sensors and im planning to use one of these two 3D printed rx sensors that allow for a mini laser for finding height and if they are mounted parallel with the vehicle. the hollow piece is a bit off centered and the solid one is to one side. any help with be great with choosing the best one to print
 

Attachments

  • Screen Shot 2020-12-30 at 2.31.29 PM.png
    Screen Shot 2020-12-30 at 2.31.29 PM.png
    172.3 KB · Views: 35
  • Screen Shot 2020-12-30 at 2.31.23 PM.png
    Screen Shot 2020-12-30 at 2.31.23 PM.png
    173.5 KB · Views: 38

Vancity23

Premium Plus
Lifetime Premium
Advanced User
Joined
Jun 11, 2017
Messages
6,217
Reaction score
8,672
Location
Vancouver, B.C.
The best ones in my opinion were created by one of our members here, totally adjustable in all directions.

 

matt8119

Learning to Drive
General User
Joined
Jul 26, 2018
Messages
16
Reaction score
9
The best ones in my opinion were created by one of our members here, totally adjustable in all directions.

ive seen those, but they dont work for my application. hence why im looking at using a more fixed mount than one that is adjustable.
 

RedThread

Learning to Fly
Beginner User
Joined
Sep 2, 2020
Messages
215
Reaction score
591
Location
SW Florida
(fwiw, just received my ALP in the post, thanks BRD)
.
The manual details the keyhole locations for the RCV sensor, it appears neither sketch meets both keyholes locations. That may cause confusion. (If your intent is to keyhole the sensor.)
 

Flonase

Course X
Premium Plus
Lifetime Premium
Intermediate User
Joined
Sep 10, 2017
Messages
522
Reaction score
816
im looking to install laser mounts for my RX sensors and im planning to use one of these two 3D printed rx sensors that allow for a mini laser for finding height and if they are mounted parallel with the vehicle. the hollow piece is a bit off centered and the solid one is to one side. any help with be great with choosing the best one to print
I made the one with the hole to the side to use much less material. It will print more quickly. In all other respects they are interchangeable.
 

Discord Server

Latest threads

Latest posts

Forum statistics

Threads
95,501
Messages
1,453,227
Members
24,478
Latest member
danimajado
Top