TMG CPU - No response when being hit.

mrdead72

Learning to Fly
Beginner User
Joined
Jul 20, 2018
Messages
283
Reaction score
228
Mine is doin good , yes it is easyer just to unplug the ports off the cpu and turn it on , and then plug one in at a time , ether way it finds the problem and most likely you will still have to go to each sensor on the splitter and unplug !!! If it was single run cables to each then yes I'd say unplug from the cpu , much easyer , but since we use splitters just aswell try each sensor !!! Unplugin from the Cpu would be a quick test !! I've had 1 go out that did the samething no response , then I had one blow fuses to the cpu and one just work till it got hot and then nothing after it over heated , so just aswell try the sensors !!
Post automatically merged:

Also a big notation , if you buddle up the cables to much you will get field interference and also get nothing , so deff ck how much cable buddle you may have but this is usely found at install , on start up !!
 
Last edited:

Discord Server

Latest threads

Latest posts

Forum statistics

Threads
91,009
Messages
1,385,355
Members
22,902
Latest member
jln
Top