Search results

  1. edconline

    New daily driver incoming - 2019RS3

    Well, after a test drive last week, I realized it was time to make another questionable financial decision! I’m replacing my 2018 Golf R with a 2019 Audi RS3 sedan. Delivery this Friday! I got it in Glacier White Metallic, black optics package, carbon mirrors, technology package, red calipers...
  2. edconline

    ALP Speed Limit is going to cost me a ticket

    Ok, I know the requirement for GPS with the TX heads has been discussed to death, so I’m not going to repeat all that and demand they remove the requirement for it. (Even though we have demonstrated how laughably easy it is to defeat, so really what’s the point. Still...) However, the speed...
  3. edconline

    GPS fence muting?

    I have kind of two separate questions here. Now that I’ve been driving around with V1 driver for a bit and getting the hang of it, I am wondering about a couple possibilities. One thing I use a lot is the K band off/On (little c big C in euro mode). With Yav1 I would use the on screen button...
  4. edconline

    V1Driver on Tablet

    Ok, figured I'd make a new thread for this. Not the first one I've done on RDF in the last couple days about this issue lol, granted different apps. What it comes down to is I'm mounting a 10.5" iPad pro in my car to use as a display for some stuff I commonly use while driving. Amazing piece of...
  5. edconline

    ALP Connect Questions - iPad and Split View

    I’ve been off the forum for a while, but I’m thinking about making a change in my setup. To that end, I’m wondering if any users of ALP connect on iPad are able to tell me if it supports Split View. I know Waze does and I’d like to run both on screen. Apple leaves it up to each app developer to...
  6. edconline

    DR750LW-2CH Touchscreen/Settings Help Needed!

    So, I've been running into a pretty serious touchscreen glitch on the DR750LW lately. The screen is completely misaligned as far as the on screen buttons are concerned. What this boils down to, is there is no way at all to access the settings button. When you try and touch it, it goes to...
  7. edconline

    Southern Ontario CM users - please share your experiences

    I recently found out I'll be going to Ontario for 6 months to a year for training. I'll be driving one of my vehicles out there and I'm looking to start adjusting my CM's accordingly. My plan right now is a 9500ci and ALP quad install. Still not entirely sure about the rear ALP, or how I'm...
  8. edconline

    Canadian Scanner Frequencies (Alberta)

    Was wondering if someone in AB has a comprehensive list of the freqs for LEO's here. Recently got a Uniden BCD396XT and it was set up by another member for me, we have the same scanner, and can monitor EPS, RCMP K Division, and EMS, but critically are missing AB Sheriff's. Additionally, it would...
  9. edconline

    BT module and Phone Volume WAY too low for alerts

    Ok, so i know this has been brought up before, but it bears repeating. I have been using the BT gen 2 module with my ALP HiFi unit recently and FOR THE MOST PART I love it. The app is pretty awesome, the radar and laser alerts on screen display well, the log is awesome, and it truly does switch...
  10. edconline

    Mounting ALP GPS Antenna

    I'm currently wiring up the ALP RG module and GPS antenna, and was about to mount the antenna when I realized I wasn't sure which direction it went as it came with no directions. What I mean by direction, is that for example my remote starter antenna is 'upside down' in the sense that it is...
  11. edconline

    Next dash cam on the way!

    Well, the season is coming up to get my summer car out of hibernation shortly, and that means I needed a new dash cam for the daily. Since I bought the Juke last August, I had been swapping my Lukas LK7900 back and forth between the two cars (I mean I can't drive them both at once!) I was tired...
  12. edconline

    ALP + StiR + and HiFi

    So I grabbed up another ALP Triple with the RG Module, GPS and BT Gen 2 from another forum, couldn't pass it up. I'm trying to plan my installation now that there are tons of options. I really like what the Gen 2 BT module can do, but the car this system will be installed in doesn't have a...
  13. edconline

    New daily - 2015 Juke Nismo RS

    Well I've been waiting some time to get a new daily (my wife needed one earlier this year, but once she got hers I was in the clear to proceed) but I finally got her: 2015 Juke Nismo RS, FWD, 6 Speed, Super Black. So let me just get out of the way the two comments which will almost...
  14. edconline

    New ALP sensors?

    I remember reading a while back about AL possibly developing some new sensors that had a vertically and horizontally mounted diode, and now for the life of me, I can't find the thread?! Is this something that is still (was?) in the works?
  15. edconline

    Mobius Issue - Auto Stary not working

    Mobius Issue - Auto Start not working I'm hoping someone that is pretty familiar with the mobius can help me out here. A couple weeks back, after grabbing some video off of the card I was using in my mobius, I wiped the card completely clean using my computer and without thinking just put it...
  16. edconline

    2010 Magnetic Black 370Z (edconline build)

    Well, I was about to finally make my CM thread seeing as it is pretty much done (for this year), but I realized some of the photos I want to add in for it I still have to take. So I decided I would start out making a build thread for my car, and then link to/make a CM thread from there. You may...
  17. edconline

    How to Remove adhesive from Lukas Mount

    Ok so I am at a total loss here. I've tried everything to remove the mount for my LK7900 from the windshield and that thing is welded on there. I want to move it to my other car, and put the mount from that car into the daily. I have never seen a 3M adhesive strip stick like this one, it's good...
  18. edconline

    V1 audio jack?

    So I am in the process of moving my V1 to my other car and I am wiring an external speaker to it. However I just found out when I attempted to plug the 3.5mm speaker connector into the V1 that it does not have a 3.5mm port.. It appears to be 2.5mm. Please tell me all I need is a mono 3.5mm to...
  19. edconline

    Two days with the Valentine One

    Well, it's been two days running the V1 and YaV1 so far. I'm going to post a mini review and maybe add to it as I spend some more time with both. Let's start at the beginning: The Purchase: As some of you probably read in my other post, the purchase experience for the V1 wasn't exceptional...
  20. edconline

    STiR O coming!! :D

    Grabbed those O's for sale this morning, this will complete my setup for the Z! I plan to send the heads in to Bel for a tune up, then I'll install one unit on the Z and either resell the other one, or keep it for the DD. Undecided, it just made more sense to grab both while they were available...
Top