NVM... I thought it was , it usually always is. It must have been turned off after I ran the monthly system update. I've noticed a few things that were reset after this last update. I assumed (I know what happens when one assumes) that all the settings were carried over just like all the other...
The H3 LED's I put in my fog lights do the same. I did have to remove the 'hat' from inside the lens to get the beam pattern I wanted. I love being able to switch from white to yellow.
Edit.. My stock housing was made for Halogens. When I installed the Katur 9003 Hi/Low bulbs, they (LED bulbs) allow the bulb to turn 90 degrees by turning the fan bottom after install. When I turned my bulbs 90 degrees the light pattern matched the stock halogen. I have yellow/white fog lights...
I replaced all the lights on my '01 Maxima with LED'S from Katur (Amazon). My neighbors were so impressed that they had me get lights for their 3 vehicles :) I took my car to the dealership last month and the service supervisor c as me back out and asked me where I got them. :) Plus Katur has a...
On my 2001 Maxima SE, The main wiring harness comes down from engine bay and runs behind the driver side wheel well cover into the car just above the dead pedal (Automatic) I used a step drill and drilled a 3/4 hole a few inches over from the main harness (closer to the steering wheel) It was...
I recently installed my Alp system and needed a 3/4 in. grommet. This allows just enough room to pass the 3 wires (1 at a time) and have a 1/2 in. split loom sheath around the wires for protection. Fits pretty tight all in all.