Search results

  1. C

    Part Number needed: Uniden R3

    Has anyone been able to find a replacement speaker for the R1/3? My R3 just kind of stopped making sound. I got an alert and the voice had a ton of static, but the beeps were fine. I rebooted it and beeps were good, but anything voice was filled with static like before. Next alert, volume...
  2. C

    Part Number needed: Uniden R3

    Mine just gave up the ghost too. Got any replacements left?
  3. C

    PA and MRCD/T?

    I have no idea what vehicles might have been around me because I was looking for stationary radar on a pole or box because that's what I see here in MD. All I know is that in the past, at least here in MD, MRCD alerts have always been speed or RLCs. I've never had a vehicle set it off. I had...
  4. C

    PA and MRCD/T?

    What's the deal with MRCD in PA? I went skiing yesterday and and on my way to the resort, I picked up MRCD/T once. I'm just going to call it MRCD since that's how the R7 reports. On my way back It alerted 4 times. I took the same route to and from, only a slight detour to get something to...
  5. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    It is enabled and always has been. The one thing I didn't do with this last update was to factory reset before loading the new fw. Outside of that, I the did usual.. Update with recovery mode then did a factory reset. Then went in and put all my setting back in.
  6. C

    R7 - quiet ride not working for ka band

    They need to bring it back for MRCD. BTW, this weekend was the 1st time, since updating the fw, that an MRCD alert bounded between MRCD and K band, like with the older fw. The bouncing causes the the MRCD to start sound again when it switches back and forth. For now, I'm lucky I have easy...
  7. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    I can tell you think.. I had a Ka signal when into a K spot that I had locked out and instead of just muting the K band, it muted the Ka too. The other thing I'm going to do, unless Quiet ride is back to where it was.. as in just beeps then goes quiet for MRCD. Is that once Radenso comes out...
  8. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    I'm with you. I'm not sure if I'm ready to do a lockout with these MRCD alerts. I'm a bit scared it's going to lock out Ka and K band radar that I do need to see when I'm at these inner sections. In one area, the local and state LEOs have stations near by, so there's always some legit radar...
  9. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    It's bad, not just sitting at the light, but when I'm in a parking lot that has a RLC, at the intersection, that uses MRCD/T. Driving around the lot, it's non-stop annoying because it picks up, then drop, picks up then drops. I think my mute button is going to break from it.
  10. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    MRCD not muting with quiet ride is driving me crazy! I'm tired of hitting the mute button.. I'll be sitting at a light and it keeps blaring because if the signal drops for a split second, it starts up again. As for lockouts at malls and shopping centers.. Never needed it because of quiet...
  11. C

    My Uniden R3 is not picking up Mobile Speed Cameras

    Could also be laser. We had speed cams that were laser based, most have been switched out to MCRD/T or a combo of radar and laser... I'm thinking combo because some of them will set off both, but not always.
  12. C

    R7 FW 1.29 K band (BSM) falses?

    Here's my follow up... Yesterday Not really, but I think the buick was 24.18x, the other I remember was 24.16x. What was odd about the buick was that it bounced from 24.08x and 24.18x. I thought I read it wrong. 1580095278 Went skiing today up to Lewisberry, which is just north of York, Pa...
  13. C

    R7 FW 1.29 K band (BSM) falses?

    You might be right about the Mazda BSM. In the past, I got a gazillion hits from Mazda BSM and so far I haven't gotten a single one. Today, I had 2 hours of seat time and get this, I only got 3 BSM hits and they were super brief. One was a Honda, another was a Buick. The other 2, I have no...
  14. C

    R7 FW 1.29 K band (BSM) falses?

    It seems I just need more seat time. As for where I'm driving, both trips were down I-95 then back north on US1 between Cecil county and Harford county. It's about 30 miles in each direction and one trip was during rush hour the other just outside of rush hour. I'm headed to Towson later...
  15. C

    R7 FW 1.29 K band (BSM) falses?

    I'm starting this thread because the other one is all over the place on what people are seeing or what changes they might want. With this, I'd like to speak just to K band falses.. Not sure what's going on but it seems Uniden may have added something to K band falses. I'm seeing next to...
  16. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    I'm seeing something similar. I don't know what they did, but BSM falses are next to nothing. I was on the road for an hour today and I kid you not, I got one K band alert on 24.063, and it came from the rear antenna. It's gotten so quiet, I'm worried it might not alert to a legit leo running...
  17. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    I haven't gotten any false BSM appearing as MRCD/T, but I only have about an hour on the road with the new firmware.
  18. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    I have K at 70% right now. 1579814376 We've got those here too.. and I'm seeing 150ft+ detections on them. I really need Quiet ride to work with MRCD becasue we also have MRCD/T speed cams.. I want to keep those alerts, but quiet the RLC that run MRCD/T. Especially when I'm sitting at the...
  19. C

    R7 New firmware 1.29 discussion and Issue / Suggestion Updates

    And or have MRCD quiet ride as a separate menu function. There's tons of MRCD red light cams around me and hitting that mute button over and over is annoying. For whatever reason, if I hit it, it mutes for a few seconds then starts blaring again. I also would like the option to make Ka...
  20. C

    Uniden R7 1.29 Firmware can be shared now (See attached)

    Not much seat time or time to play with the settings but so far I like the new fw. My settings: Advance Ka 100% K 70% X off. MRCD On Rear sensitivity is set to 70% Arrows are very consistent now with the change from front to back. BSM alert range has gotten way shorter and I get very few...
Top