2.0.7 released

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Software Developer
Joined
Sep 6, 2016
Messages
4,489
Reaction score
9,815
Location
Raleigh, NC
What's new in this release?

* Option to flash the V1 priority alert display's signal strength meter and orientation arrow on new priority alert (display > priority alert display, default = 5 seconds)
* Option to enable/disable the small antenna bias arrow drawn on top of (or next to) V1 alert orientation arrows (display, default = enabled)
* Option to show enabled override areas on alert map (alert map overlays, default = disabled)
* Override area search/draw map shows existing override areas
* Override draw mode detects and rejects self-intersecting polygons
* Added "None" selection to override profile action, in case user only wants to change PAWS or just announce region entry/exit
* Overrides now available to Standalone mode (can auto enable/disable PAWS, profile selection ignored)
* 25 March 2020 camera database

Coming soon to a Play Store near you.

JB
 

InDecay

Learning to Fly
Beginner User
Joined
Dec 20, 2019
Messages
139
Reaction score
176
Location
Phoenix, AZ
Sweet, it's live.
 

Vehicle 1

Advanced User
Premium Member
Joined
Jan 17, 2013
Messages
1,463
Reaction score
892
Very impressive JB. You are a machine. Thank you!
 

InsipidMonkey

Essential Monkey
Moderator
Advanced User
Premium Member
Joined
Mar 22, 2017
Messages
6,855
Reaction score
15,282
Location
New England
They must now be skipping the review process, at least for apps that have never been rejected or suspended.
Maybe there's a JBV1 fan at Google? ;)
 

VariableWave

Advanced User
Lifetime Premium Member
Joined
Dec 31, 2017
Messages
919
Reaction score
1,824
Location
SEVa
More V1 Porn fun :spazface:
 

Bloovy One

115,000+ miles with JBV1!
Advanced User
Lifetime Premium Member
Joined
Feb 8, 2016
Messages
4,775
Reaction score
9,756
Location
Western NC
It's the little things that take some time to notice. :) These might have existed in other recent versions:

Noticed today - In the Alert Log for a particular alert, I see a handy reference for the formatting used.
(Muted Not Muted Locked Out Priority)

Noticed in v2.0.6 - CSA (and similar alerts) Have an actual thumb symbol where it shows a thumbs up to an alert.
 

NVR2FST

Advanced User
Lifetime Premium Member
Joined
Aug 1, 2011
Messages
1,375
Reaction score
1,054
Location
Somewhere in cyberspace.
Maybe I missed it somewhere, but if I use speed sensitive profile shifting, what profile should I push to the V1? Or does the speed sensitive profile override whatever profile is currently in use (assuming "USA Mode" has been selected)?
 

Bloovy One

115,000+ miles with JBV1!
Advanced User
Lifetime Premium Member
Joined
Feb 8, 2016
Messages
4,775
Reaction score
9,756
Location
Western NC
The speed sensitive section doesn't change profiles, but changes modes between All Bogeys, Logic, and Advanced Logic.
I'm currently set to use Advanced Logic under PSL and Logic above PSL.

This worked really nicely for me a couple of days ago where I parked at a store and the rear antenna was detecting the store's K-band door openers. When I got back in the car the V1 was silent because it was in Advanced Logic mode below PSL which silences all rear X & K signals from behind unless they are strong signals.

As for profiles, the Auto Profile Override feature lets JBV1 change profiles to turn bands and features on and off as you cross State, County, City, or hand drawn boundaries.
:)
 

rhk118

Learning to Fly
Beginner User
Joined
Sep 1, 2019
Messages
65
Reaction score
41
Location
New England
The speed sensitive section doesn't change profiles, but changes modes between All Bogeys, Logic, and Advanced Logic.
I'm currently set to use Advanced Logic under PSL and Logic above PSL.
So I've noticed just a tiny little detail with the speed sensitive 'Big L' and 'Little L' and automatic profile overrides based on location. I have my speed sensitivity set to 50 MPH and below that V1 goes to Advanced Logic Mode (Big L) and above that speed switches to logic mode (Little L). That works fine. I now have a custom map override at my house to write the V1 to K/Ka band profile in logic mode to keep it in a generic profile that works for all states surrounding me...when I get 1/4 mile away from my house it writes a Ka only profile in the all bogies (Big A) mode that works in my immediate area where 90% of my driving occurs. What I've noticed is that once profile is written the V1 stays in 'A' mode and ignores the speed sensitive "Big L" / "Little L" settings UNTIL I EXCEED the speed sensitive setting I have set of 50 MPH then it switches to Logic mode (little L) and below 50 MPH goes to Advanced logic mode ("Big L")....I know this is picky and likely a programming constraint but is there any way around this @johnboy00? Love the updates thank you so much.
 

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Software Developer
Joined
Sep 6, 2016
Messages
4,489
Reaction score
9,815
Location
Raleigh, NC
So I've noticed just a tiny little detail with the speed sensitive 'Big L' and 'Little L' and automatic profile overrides based on location. I have my speed sensitivity set to 50 MPH and below that V1 goes to Advanced Logic Mode (Big L) and above that speed switches to logic mode (Little L). That works fine. I now have a custom map override at my house to write the V1 to K/Ka band profile in logic mode to keep it in a generic profile that works for all states surrounding me...when I get 1/4 mile away from my house it writes a Ka only profile in the all bogies (Big A) mode that works in my immediate area where 90% of my driving occurs. What I've noticed is that once profile is written the V1 stays in 'A' mode and ignores the speed sensitive "Big L" / "Little L" settings UNTIL I EXCEED the speed sensitive setting I have set of 50 MPH then it switches to Logic mode (little L) and below 50 MPH goes to Advanced logic mode ("Big L")....I know this is picky and likely a programming constraint but is there any way around this @johnboy00? Love the updates thank you so much.
That's how it works. I can't decide for you which mode is more important--the one in your profile override or the one you selected for auto mode. Adding auto mode overrides to profile overrides may be too complex for people to understand what's happening while driving, so the best I probably can do is auto disable auto mode while an override is active.
 

AJinNJ

PSL +5
Intermediate User
Joined
Oct 23, 2017
Messages
449
Reaction score
445
Location
NJ
Yeah, using the two features together, you have to almost create a matrix for what your settings will be per Profile + AutoMode.

When I suggested the Feature to JB (I think it was me...I take no credit for JB's incredible app...just a comment for this thread...) the idea was kind of a "Simple Mode" to get users started with JBV1's features/power. Putting the two features together, you need to be a pretty advanced user and understand the complexity of the two interacting or you can do the proverbial "shoot yourself in the foot". :)

Is there an indicator on the main display when the Auto-Mode PSL/Speed Override is active? Maybe that's worthwhile...maybe not?
 

rhk118

Learning to Fly
Beginner User
Joined
Sep 1, 2019
Messages
65
Reaction score
41
Location
New England
you need to be a pretty advanced user and understand the complexity...
I am just an older young Padawan...starting to open up these more advanced settings and realizing just that! :science:
 

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Software Developer
Joined
Sep 6, 2016
Messages
4,489
Reaction score
9,815
Location
Raleigh, NC
No perfect, don't change it! I'm in 'A' anyway, not like its going to filter something unexpected in that mode.
I am making one minor change: When a USA profile is pushed (auto or manual), the current analyzer mode will not be changed when Auto Mode is enabled.
 

Discord Server

Latest threads

Forum statistics

Threads
83,436
Messages
1,267,623
Members
21,057
Latest member
dn325ci
Top