TMG "system on" sound off?

Bingly

PSL +5
Intermediate User
Joined
Nov 2, 2018
Messages
489
Reaction score
390
Location
Tampa
As the title suggests is there a way to turn that start up sound off?
 

6thgear

PSL +5
Intermediate User
Lifetime Premium Member
Joined
Dec 10, 2017
Messages
402
Reaction score
469
Location
Central FL
As the OP inquires, this is a feature I would certainly like to see in a future FW. Maybe different options -

  • Voice “System On/Armed”;
  • a single beep;
  • no audible alert.
 

Bingly

PSL +5
Intermediate User
Joined
Nov 2, 2018
Messages
489
Reaction score
390
Location
Tampa
No, this is there for confirmation of the system being on.
If there was enough interest could they add an option to turn it off?
Post automatically merged:

As the OP inquires, this is a feature I would certainly like to see in a future FW. Maybe different options -

  • Voice “System On/Armed”;
  • a single beep;
  • no audible alert.
This^
 
Last edited:

VariableWave

Advanced User
Lifetime Premium Member
Joined
Dec 31, 2017
Messages
825
Reaction score
1,377
Location
SEVa
As the OP inquires, this is a feature I would certainly like to see in a future FW. Maybe different options -

  • Voice “System On/Armed”;
  • a single beep;
  • no audible alert.
I really do not find it annoying, though I have found a kick to a wire, or something else, the TMG may not be on.. or when I do use JBV1, I miss that it was on. For a two sec notifier, rather have vs not... since no other indicator like an independent LED on the dash or other area to know, as it is an AIO setup.
 
Last edited:

Bloovy One

110,000+ miles with JBV1!
Advanced User
Lifetime Premium Member
Joined
Feb 8, 2016
Messages
4,181
Reaction score
8,186
Location
Western NC
Turn the volume down on the CPU and use JBV1 for louder and very visible alerts.

I do have my CPU announce when it comes on FWIW as part of my "pre-flight-procedures". Once JBV1 connects, it reduces the CPU volume automatically.
Post automatically merged:

Does anyone want to see what a JBV1 alert looks like for TMG? I can do a quick demo.
 
Last edited:

Kennyc56

Ford Lover-I/O hater!
Advanced User
Lifetime Premium Member
Joined
Feb 22, 2018
Messages
3,264
Reaction score
8,617
Location
I/O Hell, Aka Eastern N.C.
Funny how we all like different things! I actually get a kick out of hearing "system on". It lets me know my system is on without me having to open my console and look, since that's where my CPU is hidden!
 

NorEaster18

Probably stuck in traffic...
Advanced User
Joined
Sep 5, 2018
Messages
952
Reaction score
2,020
Location
New England
Funny how we all like different things! I actually get a kick out of hearing "system on". It lets me know my system is on without me having to open my console and look, since that's where my CPU is hidden!
Thinking the exact same thing! I like the reminder that it's powered up. Although in fairness, I also leave self test on on my detectors and the start up noise on my dash cam on. I prefer audible confirmation that my systems are on.
 

Bloovy One

110,000+ miles with JBV1!
Advanced User
Lifetime Premium Member
Joined
Feb 8, 2016
Messages
4,181
Reaction score
8,186
Location
Western NC
Here's the small demo video. A couple of notes:

Normally I'd have the TMG come on the same time as my V1 and the announcement ends up being right after the startup sounds of the detector. (All of which does not happen until I press a secret button after starting the car)
For this video, I turned off the TMG with my kill switch and started the recording first with JBV1 already running and then turned the TMG kill switch back on.

I also demonstrated what the TMG interface looks like. When TMG connects to JBV1, JBV1 is set to mute the CPU. I show what happens when changing modes with, and without CPU audio. Note that I have my receive only mode set to 15MPH.

Finally, I show back and front alerts. All audio is generated by JBV1 for those. If I'd not had my phone turned on or with me (Which never happens) the TMG CPU would have made noises instead.

 

6thgear

PSL +5
Intermediate User
Lifetime Premium Member
Joined
Dec 10, 2017
Messages
402
Reaction score
469
Location
Central FL
Here's the small demo video. A couple of notes:

Normally I'd have the TMG come on the same time as my V1 and the announcement ends up being right after the startup sounds of the detector. (All of which does not happen until I press a secret button after starting the car)
For this video, I turned off the TMG with my kill switch and started the recording first with JBV1 already running and then turned the TMG kill switch back on.

I also demonstrated what the TMG interface looks like. When TMG connects to JBV1, JBV1 is set to mute the CPU. I show what happens when changing modes with, and without CPU audio. Note that I have my receive only mode set to 15MPH.

Finally, I show back and front alerts. All audio is generated by JBV1 for those. If I'd not had my phone turned on or with me (Which never happens) the TMG CPU would have made noises instead.

Thanks for your efforts and time here in assembling that demo. Really neat stuff!

I am just not sold on running two phones as a I have an iPhone & use CarPlay. I have been tempted to give it a try (I do have a droid laying around)...
 

Discord Server

Latest threads

Forum statistics

Threads
81,961
Messages
1,244,034
Members
20,754
Latest member
Uniden Fan
Top