ALP Firmware is stating to roll out 5.5.8/8.7

Dragons

Breathing fire
Intermediate User
Joined
Nov 21, 2013
Messages
791
Reaction score
528
I'll try this. Wondering if the CPU is tuned per sensor setup E.G buy a quad and reset to default insists the sensors should be present on the rear? Doubt it. Seeing as you manually allocate the ports.
My CPU has hosted a Single. dual, triple and quad. Applying a policy like that would make no commercial sense.
 

Saussie

PSL +5
Intermediate User
Joined
May 8, 2018
Messages
615
Reaction score
370
Location
Planet X
My CPU has hosted a Single. dual, triple and quad. Applying a policy like that would make no commercial sense.
Agree. Just wondered if it was a present out the box thing. Mines second had so I've no history. HW1 tho
 

BestRadarDetectors

Manufacturer/Vendor
Advanced User
Premium Member
Manufacturer
Joined
Oct 17, 2011
Messages
12,626
Reaction score
29,141
Should the profiles be saved individually just in case? Or one save does all? (Via Bluetooth)
All settings are stored together in one file but if settings change you would need to verify the settings are correct on all the individual profiles before saving it.

Sent from my SM-N960U using Tapatalk
 

BestRadarDetectors

Manufacturer/Vendor
Advanced User
Premium Member
Manufacturer
Joined
Oct 17, 2011
Messages
12,626
Reaction score
29,141
My fw says 5.5.7??
Update the firmware again. There was a minor bug in 5.5.7 and 5.5.8 was released quickly after to correct it.

Sent from my SM-N960U using Tapatalk
 

tempnexus

Breaking The Social Norm One Post at a time
Banned User
General User
Premium Member
Joined
Jul 31, 2015
Messages
6,218
Reaction score
7,795
Age
108
Location
DMV
Just updated. Had the app crash like 10 times. Now after update I have GPS and R2 failed. I don't have GPS or R2.

Screenshot_20191109-120326.png
 
Last edited by a moderator:

BestRadarDetectors

Manufacturer/Vendor
Advanced User
Premium Member
Manufacturer
Joined
Oct 17, 2011
Messages
12,626
Reaction score
29,141
Just updated. Had the app crash like 10 times. Now after update I have GPS and R2 failed. I don't have GPS or R2.
Verify you are on the current ALP Connect App. Run a factory reset and load a new config file. If you stored an old file online dont just download the old one. Make any change and save a new file on the server and then download it into the system. Verify you are also on 5.5.8 on the about page in ALP Connect and you should be good.
 

Saussie

PSL +5
Intermediate User
Joined
May 8, 2018
Messages
615
Reaction score
370
Location
Planet X
All settings are stored together in one file but if settings change you would need to verify the settings are correct on all the individual profiles before saving it.

Sent from my SM-N960U using Tapatalk
Yep, confirmed that's all good. 3 profiles all the same sensor settings.
No gps error for the record and don't have one attached anyway.
R2 error still present.
All good though if others are getting this issue. Will wait for the next update/fix.
Not experienced any locking up either on this system.
 

tempnexus

Breaking The Social Norm One Post at a time
Banned User
General User
Premium Member
Joined
Jul 31, 2015
Messages
6,218
Reaction score
7,795
Age
108
Location
DMV
Verify you are on the current ALP Connect App. Run a factory reset and load a new config file. If you stored an old file online dont just download the old one. Make any change and save a new file on the server and then download it into the system. Verify you are also on 5.5.8 on the about page in ALP Connect and you should be good.
Awesome. Fixed. However, since the latest Alp app release the app keeps crashing on my Pixel 3 xl Android OS 10.

It crashes right at the transition from Green car to guard Blue car.

Also it takes forever to initially transition from Green to blue.
 

BestRadarDetectors

Manufacturer/Vendor
Advanced User
Premium Member
Manufacturer
Joined
Oct 17, 2011
Messages
12,626
Reaction score
29,141
Awesome. Fixed. However, since the latest Alp app release the app keeps crashing on my Pixel 3 xl Android OS 10.

It crashes right at the transition from Green car to guard Blue car.

Also it takes forever to initially transition from Green to blue.
Make sure Skip Warmup is enabled or it will take a minute for the transition. I dont have a pixel phone to test it on. Send me a copy of the statistics file when connected to BT and include your email address. I might be avle to get you a debugging version of ALP Connect which will capture crash data.

The few people getting R2 Alerts? Are you all on the older HW1 CPU's?
 
Last edited:

Saussie

PSL +5
Intermediate User
Joined
May 8, 2018
Messages
615
Reaction score
370
Location
Planet X
Make sure Skip Warmup is enabled or it will take a minute for the transition. I dont have a pixel phone to test it on. Send me a copy of the statistics file when connected to BT and include your email address. I might be avle to get you a debugging version of ALP Connect which will capture crash data.

The few people getting R2 Alerts? Are you all on the older HW1 CPU's?
HW1
 

thanks

for all the fish
Advanced User
Lifetime Premium Member
Joined
Sep 16, 2016
Messages
5,941
Reaction score
7,116
Is the latest ALPConnect available for iOS yet?
 

BestRadarDetectors

Manufacturer/Vendor
Advanced User
Premium Member
Manufacturer
Joined
Oct 17, 2011
Messages
12,626
Reaction score
29,141
Is the latest ALPConnect available for iOS yet?
Yes, But it the IOS issue has a slight bug that defaults to kmh instead of mph so a new app should be out shortly to correct that issue.
 

steve

Advanced User
Premium Member
Joined
Nov 25, 2012
Messages
632
Reaction score
681
Location
Brooklyn, NY
I haven't been following - I opened up ALP Connect on my iPhone to upgrade and it no longer sees my Bluetooth. I only really use it when I update firmware, so don't use it normally to know how long this has been going on.
 

G37X Jockey

Advanced User
Premium Member
Joined
Jul 22, 2012
Messages
1,362
Reaction score
1,224
Location
Behind my Steering Wheel
I haven't been following - I opened up ALP Connect on my iPhone to upgrade and it no longer sees my Bluetooth. I only really use it when I update firmware, so don't use it normally to know how long this has been going on.
Try re-pairing with ALP. You'll need the 4 digit PIN from your bluetooth module.
 

BestRadarDetectors

Manufacturer/Vendor
Advanced User
Premium Member
Manufacturer
Joined
Oct 17, 2011
Messages
12,626
Reaction score
29,141
I haven't been following - I opened up ALP Connect on my iPhone to upgrade and it no longer sees my Bluetooth. I only really use it when I update firmware, so don't use it normally to know how long this has been going on.
Make sure you are on the current version of ALP Connect and that you have your phones BT turned on. If its a new or upgraded ALP Connect install you will need to Hit Scan and then pair with the system with the 4 digit pin on the BT module.
 

steve

Advanced User
Premium Member
Joined
Nov 25, 2012
Messages
632
Reaction score
681
Location
Brooklyn, NY
Make sure you are on the current version of ALP Connect and that you have your phones BT turned on. If its a new or upgraded ALP Connect install you will need to Hit Scan and then pair with the system with the 4 digit pin on the BT module.
All good now. Think the app got screwed up in iOS 13 update. Deleted the app, reinstalled and worked like always after pin was entered.
 

Ermo x

PSL +5
Intermediate User
Joined
Oct 24, 2018
Messages
350
Reaction score
206
Prior to the update I used to have a static sound blasting when starting the system every here and then also some r2 disconnected msg's but it was sporadic...after the update I had GPS signals lost only twice. I'm hopeful all the other issues were corrected. I'll be giving a few more days before I start bugging.
 
Last edited:

angrypenguin

Advanced User
Lifetime Premium Member
Joined
Aug 19, 2017
Messages
3,352
Reaction score
3,158
Couple of things:

1) BIG kudos to the GPS sensitivity change or however you call it. When I open the door to my car my accessories get powered up. I'm a bit surprised that it gets a GPS signal prior to me actually starting the car. I had to double take a few times in awe. Much much appreciated!

2) I had a weird...issue that it probably a non issue? Took the car out for a DETC test run this morning and on the very first hit, the sound emitted by the ALP was a different pitch than usual (the *yelp yelp*). I thought the system had frozen (it happens VERY rarely) but sure enough it was JTG so it was clearly working correctly. I've never ever heard that specific pitch before. I couldn't duplicate it either otherwise would have recorded it but thought that is worth pointing out.
 

Eloi

Advanced User
Premium Member
Joined
Jan 13, 2013
Messages
4,637
Reaction score
4,378
Easy peasy update ...as usual , thanks .
 

Discord Server

Latest threads

Latest posts

Forum statistics

Threads
79,343
Messages
1,207,837
Members
20,121
Latest member
yzfrr11
Top