Two glitches

LeftLaneInPA

School buses are my nemeses.
Advanced User
Joined
Jun 20, 2017
Messages
2,539
Reaction score
3,112
Location
Clue's in the name
Encountering two problems with JBV1 1.7.1.

Problem 1: encountered a PA State Trooper running IO K-band last Sunday with a frequency of 24.151. I went to the Alert Log and marked it as IO in the drop-down menu. It is now showing as "Alert (22 hits) (IO)". I then selected "Whitelist this Alert".

But when I use the "Filter: Whitelisted" option, this alert isn't showing up. Selecting this entry still shows the "Whitelist this Alert" option (it's not grayed out). I selected it again but it doesn't want to stick. Two phone restarts haven't fixed it. I've also tried clearing out the cache.

Problem 2: I'm having issues trying to set a Profile Override area. The area shows up in JBV1 when I do a search for it. When I select the area, it'll display "Fetching polygons" and then... nothing. Selecting it again will again display "Fetching polygons" but it won't go past that point.

I checked the area in OpenStreetMaps and it appears to be well-defined.
 

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Joined
Sep 6, 2016
Messages
3,866
Reaction score
7,316
Location
Raleigh, NC
Encountering two problems with JBV1 1.7.1.

Problem 1: encountered a PA State Trooper running IO K-band last Sunday with a frequency of 24.151. I went to the Alert Log and marked it as IO in the drop-down menu. It is now showing as "Alert (22 hits) (IO)". I then selected "Whitelist this Alert".

But when I use the "Filter: Whitelisted" option, this alert isn't showing up. Selecting this entry still shows the "Whitelist this Alert" option (it's not grayed out). I selected it again but it doesn't want to stick. Two phone restarts haven't fixed it. I've also tried clearing out the cache.

Problem 2: I'm having issues trying to set a Profile Override area. The area shows up in JBV1 when I do a search for it. When I select the area, it'll display "Fetching polygons" and then... nothing. Selecting it again will again display "Fetching polygons" but it won't go past that point.

I checked the area in OpenStreetMaps and it appears to be well-defined.
1: The alert log shows hits as they were when logged. Whitelisting (or locking out) an alert from the alert log does not modify the logged hits, so they won't show up in the filter.

2: The polygons are loaded from a different, but OSM-based, service that provides them in a more suitable format. If you can tell me what area you were trying to load, I may be able to figure out why it wouldn't.
 

LeftLaneInPA

School buses are my nemeses.
Advanced User
Joined
Jun 20, 2017
Messages
2,539
Reaction score
3,112
Location
Clue's in the name
1: The alert log shows hits as they were when logged. Whitelisting (or locking out) an alert from the alert log does not modify the logged hits, so they won't show up in the filter.
Is there any way to check to make sure it was whitelisted short of driving around that particular stretch of interstate hoping to encounter that particular Trooper?

When I select Filtered: Instant On that particular entry does show up in the filtered results.

2: The polygons are loaded from a different, but OSM-based, service that provides them in a more suitable format. If you can tell me what area you were trying to load, I may be able to figure out why it wouldn't.
I'll PM you.
 

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Joined
Sep 6, 2016
Messages
3,866
Reaction score
7,316
Location
Raleigh, NC
Is there any way to check to make sure it was whitelisted short of driving around that particular stretch of interstate hoping to encounter that particular Trooper?

When I select Filtered: Instant On that particular entry does show up in the filtered results.
From the map view of an alert, toggle on the lockout markers and/or circles. Whitelist is just a type of lockout, with inverted logic.

The constant/instant on tags are specifically for alert log filtering, so they are applied to an existing alert. However, showing an alert as locked out or whitelisted when it wasn't at the time of logging would be misleading.
-- Double Post Merged: --
I investigated that location, and the polygon service can't get any polygons for it. The service returns an HTTP 500 error and the following message:

Error when getting polygon from database
 
Last edited:

LeftLaneInPA

School buses are my nemeses.
Advanced User
Joined
Jun 20, 2017
Messages
2,539
Reaction score
3,112
Location
Clue's in the name
From the map view of an alert, toggle on the lockout markers and/or circles. Whitelist is just a type of lockout, with inverted logic.
Aaah, I see them now. It's a faint white/gray circle over the area when I select Lockout Circles.
 

LeftLaneInPA

School buses are my nemeses.
Advanced User
Joined
Jun 20, 2017
Messages
2,539
Reaction score
3,112
Location
Clue's in the name

LouG

Intermediate User
Joined
Jan 2, 2014
Messages
2,571
Reaction score
2,654
Another small glitch. The speed display reverted to the old small display at the bottom left of the screen. After a laser alert it was back to its normal larger size.
I'll check to see if it does it again tonight.
 

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Joined
Sep 6, 2016
Messages
3,866
Reaction score
7,316
Location
Raleigh, NC
Another small glitch. The speed display reverted to the old small display at the bottom left of the screen. After a laser alert it was back to its normal larger size.
I'll check to see if it does it again tonight.
I'll have a look at it.
 

LeftLaneInPA

School buses are my nemeses.
Advanced User
Joined
Jun 20, 2017
Messages
2,539
Reaction score
3,112
Location
Clue's in the name
Whitelist is just a type of lockout, with inverted logic.
If I "Delete Automatic Lockouts" or "Delete Manual Lockouts", will that also delete whitelisted alerts?
 

Discord Server

Latest threads

Forum statistics

Threads
77,641
Messages
1,183,133
Members
19,860
Latest member
henryr01
Top