ALP Hifi Keypad pinout for switches (1 Viewer)

Flonase

Course X
Intermediate User
Lifetime Premium Member
Joined
Sep 10, 2017
Messages
330
Reaction score
405
I made these breakout boards for another user on rdf. I still have 9 pcbs left so I can probably solder up a few more and send em out.
Basically they plug in between the cpu and control set and break out the two buttons on screw terminals.

View attachment 121768
That’s fantastic! Can you share the basic circuit diagram? Just the interesting part - no need to include the pin-to-pin connections straight from one RJ45 to the other.
 

SquirrelMaster

Has a subscription with CHP
Advanced User
Lifetime Premium Member
Joined
Dec 3, 2015
Messages
2,549
Reaction score
4,824
Location
Liberal California
That’s fantastic! Can you share the basic circuit diagram? Just the interesting part - no need to include the pin-to-pin connections straight from one RJ45 to the other.
It will be nothing interesting. Literally just a breakout boards with 0 active parts. The pcb has 2 rj45 connectors and 2 screw terminals.
 

Flonase

Course X
Intermediate User
Lifetime Premium Member
Joined
Sep 10, 2017
Messages
330
Reaction score
405
IIRC, Here is what the pinout on the rj45 connector is:
  1. Data
  2. Data from control set to alp
  3. GND
  4. 5v power for control set
  5. Data/signaling (not sure what this line is used for)
  6. Menu button (3v3 pull up, active low)
  7. 12v power
  8. Power button (12v pullup, active low)
As long as that’s correct, that was really all I was after. Thanks!
 

CA90

Premium RDF Member
Beginner User
Premium Member
Joined
Jul 10, 2019
Messages
106
Reaction score
94
Location
somewhere, over the raiinbow
Regarding the comments about bluetooth shutting down HiFi and worrying about the phone dying in that state.

Has anyone looked to see if the bluetooth module communicates to the control box the same way the control set does? Theoretically they would communicate the same way and the bluetooth module is basically simulating a button press.

control box -> breakout -> bluetooth -> HiFi

If that is true, the having the breakout between the control box and breakout instead of connected directly to the control set there is nothing to block buttons presses originating from the breakout. Then you can have both buttons and bluetooth.
 

SquirrelMaster

Has a subscription with CHP
Advanced User
Lifetime Premium Member
Joined
Dec 3, 2015
Messages
2,549
Reaction score
4,824
Location
Liberal California
No Bluetooth is different. That being said, you should be able to use the hifi buttons and the breakout buttons to kill during an alert when on bt
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Discord Server

Latest threads

Latest posts

Social Group Activity

Forum statistics

Threads
76,728
Messages
1,168,671
Members
19,692
Latest member
rasool
Top