TMG a-15 early JTK CPU fix update.

Jag42

USA TMG a-15 Dealer & Rep & TXCTG Rd tester
Advanced User
Premium Member
Manufacturer/Vendor
Joined
Jun 13, 2011
Messages
9,063
Reaction score
17,406
Ming and his engineers have fixed the early JTK blocked by the audio voice. Now you can JTK instantly !

*This is an control fw CPU app designed just for the CPU firmware,not alglo fw. This is not the original Laser Defender Alglo App. You will need to un-install your original TMG app,or download the CPU app on a different device. It will over ride your current app. Once the CPU firmware is updated, upload the TMG Defender app back on your device.

Instructions :

You can now update the new Control firmware,that allows you to early JTK during the audio voice now.

Please follow the steps:

1. Install the Control FW update APP:

https://drive.google.com/uc?export=download&id=1iSGpHf5fgT1CVM_Q8m0oMg3bJ1F0L9ji


2. Pin the reset button with a needle,or a staple on the side of the CPU,beside the DTA port for 2 seconds, until the red or orange LED lights up.

3. Connect your device from the FW app, to the CPU by bluetooth,tapping the Off button in the bottom left to find your CPU name device. Select your CPU device to connect to it.

4. Press the lower right button that says
"CTUD"

5. If the power button LED on your CPU button is green or orange, then choose V1.0, If it is blue, choose V3.0 FW.

6. Select Start transferring and It will start to update. The CPU will power cycle by itself,after the update is completed.

7. Done


Thanks for being patient :)
 
Last edited:

dchemist

Lifetime RDF Contributor
Advanced User
Lifetime Premium Member
Joined
Jul 26, 2017
Messages
3,085
Reaction score
5,600
Location
Benton, AR
This speaks volumes to the level of support that they are going to provide! Nicely done!!!

Posted from my Pixel 2 using the RDF Mobile App!
 

Jag42

USA TMG a-15 Dealer & Rep & TXCTG Rd tester
Advanced User
Premium Member
Manufacturer/Vendor
Joined
Jun 13, 2011
Messages
9,063
Reaction score
17,406
Ming and his engineers have fixed the early JTK blocked by the audio voice. Now you can JTK instantly !

*This is an control fw CPU app designed just for the CPU firmware,not alglo fw. This is not the original Laser Defender Alglo App. You will need to un-install your original TMG app,or download the CPU app on a different device. It will over ride your current app. Once the CPU firmware is updated, upload the TMG Defender app back on your device.

Instructions :

You can now update the new Control firmware,that allows you to early JTK during the audio voice now.

Please follow the steps:

1. Install the Control FW update APP:

https://drive.google.com/uc?export=download&id=1iSGpHf5fgT1CVM_Q8m0oMg3bJ1F0L9ji


2. Pin the reset button with a needle,or a staple on the side of the CPU,beside the DTA port for 2 seconds, until the red or orange LED lights up.

3. Connect your device from the FW app, to the CPU by bluetooth,tapping the Off button in the bottom left to find your CPU name device. Select your CPU device to connect to it.

4. Press the lower right button that says
"CTUD"

5. If the power button LED on your CPU button is green or orange, then choose V1.0, If it is blue, choose V3.0 FW.

6. Select Start transferring and It will start to update. The CPU will power cycle by itself,after the update is completed.

7. Done


Thanks for being patient :)
Edit : I meant JTK early not jam. Living on 3 hours asleep today..

--- DOUBLEPOST MERGED ---

This speaks volumes to the level of support that they are going to provide! Nicely done!!!

Posted from my Pixel 2 using the RDF Mobile App!
These guys are lightning fast on firmware :)
 

RaggedEdge

Rdtalk.org Founder
Administrator
Advanced User
Lifetime Premium Member
Joined
Mar 26, 2018
Messages
1,162
Reaction score
2,730
Location
Middle Tennessee
Link to download isn't working for me.
 

Vortex

Making Videos
Observer
Advanced User
Lifetime Premium Member
Joined
Jul 19, 2012
Messages
21,138
Reaction score
41,348
Location
Washington State
Great update! I was really surprised to hear Ming was able to do it with a software update after he'd said it was a hardware limitation. Either way, this is MUCH better now. :)
 

riseboi

aka ChikinAdobo
Intermediate User
Lifetime Premium Member
Joined
Sep 28, 2018
Messages
579
Reaction score
1,320
Location
Miami, FL
Being an iOS user, I'm not familar with the Google Play store. Would I be able to use an Android tablet to download and the use the TMG Defender app to update as long as it had wifi or LTE?
 

SquirrelMaster

Has a subscription with CHP
SysOp
Advanced User
Lifetime Premium Member
Joined
Dec 3, 2015
Messages
2,691
Reaction score
5,109
Location
Liberal California
Being an iOS user, I'm not familar with the Google Play store. Would I be able to use an Android tablet to download and the use the TMG Defender app to update as long as it had wifi or LTE?
You do not even need the play store in this case. Download the APK file in the OP and copy it over to your tablet. Make sure your tablet has BLE (or whatever bluetooth TMG uses) Then install that APK and you're good to go!

This is for the update. Yeah you can play store the main app unless your tablet is old/doesnt support it
 

OBeerWANKenobi

This is not the car you're looking for.....
Advanced User
Lifetime Premium Member
Joined
Mar 20, 2018
Messages
3,728
Reaction score
9,532
Location
Right Behind You! (Wisconsin)
I updated the feature request thread and added a link to this one.
 

hammerdown

The North remembers....
Advanced User
Joined
Apr 8, 2012
Messages
11,087
Reaction score
10,237
They changed the button codes in the new firmware. If you need JBV1 connectivity, you should wait for the next JBV1 update before updating your CPU.
As cool as it is Ming fixed the JTK issue, im letting autosleep work for me. Wife needs that full 4 seconds... lol.

So ill wait til the first TMG performance update.... :quagmire:
 

johnboy00

Geaux Tigers!
Advanced User
Lifetime Premium Member
Joined
Sep 6, 2016
Messages
3,839
Reaction score
7,236
Location
Raleigh, NC
JBV1 is updated for new button status messages. I'll release an update tomorrow that works with either firmware. The bad news is that JTK from an app still has to wait on the voice alert to stop speaking. Only the hard buttons can JTK during voice alert. I'm hoping they can fix this next.
 

System

PSL ÷ 2
Advanced User
Premium Member
Joined
Jun 12, 2016
Messages
5,327
Reaction score
7,070
Location
Alberta
Being an iOS user, I'm not familar with the Google Play store. Would I be able to use an Android tablet to download and the use the TMG Defender app to update as long as it had wifi or LTE?
Yup, your tablet will work fine!
 

Jag42

USA TMG a-15 Dealer & Rep & TXCTG Rd tester
Advanced User
Premium Member
Manufacturer/Vendor
Joined
Jun 13, 2011
Messages
9,063
Reaction score
17,406
Anyone having issues besides connecting to bluetooth?
 

Matthewstorm

Premium RDF Member
Intermediate User
Premium Member
Joined
Sep 30, 2014
Messages
527
Reaction score
558
Location
Chapel Hill, NC
JBV1 is updated for new button status messages. I'll release an update tomorrow that works with either firmware. The bad news is that JTK from an app still has to wait on the voice alert to stop speaking. Only the hard buttons can JTK during voice alert. I'm hoping they can fix this next.
Update still coming today?
 

rider9195

Lifetime RDF Contributor
Advanced User
Lifetime Premium Member
Joined
Jul 29, 2013
Messages
1,142
Reaction score
1,317
Location
Ulster County, NY
Thanks Jag and the TMG team for the quick fix and update. Just updated my CPU and did a quick test, working spot on.
 

Discord Server

Latest threads

Forum statistics

Threads
77,462
Messages
1,180,455
Members
19,823
Latest member
ezekiel67
Top