Android Enhanced - Fine tuned the graphics on the Bogey Polar and Bogie Map views. Feature - New option in AutoMute settings called "Auto-UnMute V1 KMute". Basically it makes the V1 KMute feature safer to use by unmuting when V1Driver thinks it should. Read the TIP for more details. Tweak - Slight change to handling a BT Scanning error. No Crash logs for the past few releases. iOS Enhanced - New Bogey View Style called Polar. See the Tip for more detail. Try the Demo in the different Views. Enhanced - You can now control Frequency Display on Bogey Map (Show it at all or number of Decimal Places) This helps cut down clutter on the Bogey Views. Tweak - K Band Spectrum Coverage bar drawn slightly better. Bug - Ramp Indicator was not updating as often as it should have. _________________________________________________________________________________________ The new Auto-Unmute Feature is not in iOS yet, it's a bit more involved. It will come though, assuming it works good. The new Bogey Polar View is in though. This new Auto-UnMute V1 KMute feature is tricky to understand. If the primary reason you use KMute is to take advantage of KMute bridging the "BT Mute Lag" with Apps this option is for you. If the primary reason you use K-Mute is it's affect on BSM you probably DON'T want to use this. With this on, you are running MORE conservative (potentially more BSM alerts, but pure silence on everything that is supposed to locked out). Basically the KMute acts as a "Pre-Mute" for all K Alerts. What V1Driver will do is IMMEDIATELY unmute all Kmuted Alerts UNLESS it knows it should NOT (like gpsMute, AutoMute or Savvy). This works so well you can Turn OFF the two extra switches that the V1 will unmute itself if over threshold. No need to do that, V1Driver will Unmute it for you, unless it knows it should be locked out. So basically, all gpsMute, SavvyMutes and Auto-Re-Snooze will be 100% Silent (with V1 KMute UnMute Switches OFF) on the V1 every time. And you essentially have no KMute "PreMuting" on any potential threats. It's the Best of BOTH !! This option essentially moves the "BT Lag" of Muting to the a BT Lag of "Unmuting". If you have KMute in V1 Off this option does nothing. If you depend on KMute to keep BSM's in check you'll get more of those. But AutoSnooze should take care of those (AFTER you've been alerted). I could also allow the KMute Timer to be any value up to 30 seconds, not limited to 3, 5, 10, etc. But to me the most useful would be having selectivity below 3 seconds. Like 1 second KMute option (V1Driver would unmute after 1 second). So essentially V1Driver right now has implemented a 0.2 Second Delay KMute option (i.e the lag time to unmute).