Looking for 3D model of XL Display

Discussion in 'Stinger' started by DigiCrack, Sep 11, 2017.

  1. DigiCrack

    DigiCrack Learning to Walk

    2
    1
    0
    I am currently installing a Stinger VIP system into my Audi R8 and I want to install the display flush into the headliner. I am going to 3D print the mount and was hoping someone already made a model of the display I could use instead of building one from scratch.

    Thank you!
     
    Vortex likes this.
  2. jon5

    jon5 PSL + (O / U) Intermediate User

    532
    12
    0
    You're going to 3D print the mount? I'm not sure about the XL, but i thought it had the same mount as the normal display.
    The mount for the normal display has proprietary connectors built into it, so i'm not sure how you would print a viable mount.

    Or perhaps you're just wanting a printed mount to test how you'd mount the real one?
     
  3. wrxsti15

    wrxsti15 Moderator Moderator Premium Member

    1,673
    7
    0
    Send me sketch with sizes and will make you STL file for print.
     
  4. DigiCrack

    DigiCrack Learning to Walk

    2
    1
    0
    Thank you wrxsti15. My system with the XL display arrives this Thursday which will allow me to get the dimensions with the dock and display together. I know the dock is 2.756"W x 1.732"H x 0.276"D and that lines up on the horizontal centerline of the display with the bottom edges of both lined up. The XL Display dimensions are: 4.250" W x 2.75" H and 3/8” thick. When finished I am looking for something that looks like this: [​IMG]

    --- Post updated ---

    I contacted the installer that did the above work and they milled the mount directly from acrylic so they didn't have the STL I was looking for.