Connecting Blinder to STi-R Plus main unit

JYP

Learning to Drive
General User
Newly Registered
Feb 17, 2016
2
0
#1
Can anyone let me know if it is possible to connect directly to an STi-R Plus main control unit the following Blinders replacing the RX45?
BLINDER X-TREME / 7 Series Rev. 105 YW 1133
or the
BLINDER COMPACT Rev. 1.01 / 1212 (If so which wires to connect)


Also are those Blinder still able to defeat ALL or Most guns out there?

Thank you
 

Attachments

chakeubeam

To Be Determined...
Advanced User
Intermediate User
Beginner User
General User
MFG/Vendor
Newly Registered
Jul 11, 2014
3,763
2,224
Texas
#2
Blinders are good for most guns, however they have their weaknesses and depending on where you live may no longer be good enough!
 

mikedotd

Arrow enthusiast
Premium Member
Advanced User
Intermediate User
Beginner User
General User
Newly Registered
May 6, 2012
2,828
3,934
New England
#3
No, the Blinders are not compatible with the STiR Plus, but you could run them standalone.
 

JYP

Learning to Drive
General User
Newly Registered
Feb 17, 2016
2
0
#4
Any brand and model you can suggest to use with the STi-R Plus device?
I love the way you can interact with the "Mute" button on the STi-R Plus interface...
I do have those two complete Blinders Kit with everything needed to install them as stand alone, but I would prefer to use only one device...
I talked to the Beltronics CS and they told me (Unofficially) there were some other products that could be connected directly into the Main Init of the STi-R Plus device but they of course did not say which one...

Any suggestions?

Thanks
 

BestRadarDetectors

Premium Member
Premium Member
Advanced User
Intermediate User
Beginner User
General User
MFG/Vendor
Newly Registered
Oct 17, 2011
11,583
26,518
www.bestradardetectors.net
#5
Any brand and model you can suggest to use with the STi-R Plus device?
I love the way you can interact with the "Mute" button on the STi-R Plus interface...
I do have those two complete Blinders Kit with everything needed to install them as stand alone, but I would prefer to use only one device...
I talked to the Beltronics CS and they told me (Unofficially) there were some other products that could be connected directly into the Main Init of the STi-R Plus device but they of course did not say which one...

Any suggestions?

Thanks
There are none.. What they were referring to was the other way around with having the ALP connect to the Beltronics Sti-R Plus antenna. There is nothing besides their own products which can connect to their CPU.