Display clock on the screen...K band Filter???

[Rob4092xx]

A clock showed up on the screen when I turned on my LRD950 for the first time. I made some changes in the menu and noticed that I lost the clock. I checked the manual and cannot find how to turn the clock display back on. Can anyone help?

Lastly, should I run with the K Filter on or off? I do have K band in my area.

Thanks all!

 

[Bear]

Most of us run it with K filter On. You can try it with it off but I got too many falses that way.

Not sure about the clock. Like you said, no mention of it in the manual.

 

[Brainstorm69]

Do you have the GPS turned off? That's the only thing I can think out that might affect the clock.

You should turn the K filter on to help with K band falses, especially BSM (blind spot monitoring) from other cars. It doesn't effect K band detection that much.

 

[bhrodeoaz]

under display options you will find speed, compass, clock--- select clock and bam ur good to go

 

[nomore55]

FEATURES:

Super Long Range Laser Radar Detection

Voice Notifications

Radar band frequency displays

GPS for Red Light and Speed camera locations

Easy to read OLED display

User Mark set and voice notification

Advanced K band filter

Spectre I and IV undetectable

Signal Strength Meter displays Current Speed, Compass, Vehicle Battery Voltage, Altitude, and Clock

Max. Speed Warning System

 

[Brainstorm69]

I don't have a display option of "clock" on my LRD950.

 

[Rob4092xx]

Exactly...I don't have the clock option either! I am running 1.35 software. Anyone have a clock on their 950???

 

[Brainstorm69]

Yeah, I do, but the only way it doesn't display on either of my 950s is if I turn the GPS off. Is your GPS on?

 

[Bear]

Version 1.22 here and no option to display time. GPS is on.

 

[bhrodeoaz]

I have 1.35 and have clock option

---------- Post added at 07:11 PM ---------- Previous post was at 07:03 PM ----------

To get the clock back turn GPS on, scan mode off, and display off. Once GPS is connected time will display...video to follow

---------- Post added at 07:15 PM ---------- Previous post was at 07:11 PM ----------

https://youtu.be/xKRuB8AXEr0

 

[Bear]

To get the clock back turn GPS on, scan mode off, and display off. Once GPS is connected time will display...video to follow

---------- Post added at 07:15 PM ---------- Previous post was at 07:11 PM ----------

https://youtu.be/xKRuB8AXEr0

Yep, that works. How the heck did you figure that out?

 

[bhrodeoaz]

I have been testing mine out for my area messed with the settings. Just if you want the right time you have to set the time zone and DST if applicable. GPS has to be on as that is how it determines the right time and RLC ,locations etc..

 

[Trexx]

Version 1.22 here and no option to display time. GPS is on.

Just download the firmware updater from here: http://unidensupport.com/lrd950. Last time I checked it was for 1.35

 

[Rob4092xx]

Bhrodeoaz is dead on right! Turned "Scan" off and poof...the time came right up! Thanks everyone!!!!