Recent content by astronot

  1. A

    Interconversion of a DFR7 US model to a DFR7 NZ

    On NZ Ka band detection was problematic. I reinstalled NZ fw and calibrated the detector. I switched and measured several times with Us and NZ. Ka is detected in NZ 33.8 while in us firmware 33.9. The slight difference of the center switch is visible in the pictures Original position...
  2. A

    How to make visual alarm with led?

    I want to mute the device and use a led on the dashboard for alarms. So how to make blinking led alarm by using aux input?
  3. A

    Interconversion of a DFR7 US model to a DFR7 NZ

    Here is the some photos off DFR7 https://fccid.io/AMWUA1602
  4. A

    Interconversion of a DFR7 US model to a DFR7 NZ

    Interesting. I have NZ firmware on my dfr7 but didn't have any Ka alerts from cop cars. I used to get alerts when using Us firmware I had alerts on 33.8 MHz. Mi 9T cihazımdan Tapatalk kullanılarak gönderildi
  5. A

    DFR7 Firmware Update 06/27/19 V1.12E

    Thanks to Mithheru for band segmented NZ firmware. https://www.rdforum.org/index.php?threads/93228/post-1345324
  6. A

    Interconversion of a DFR7 US model to a DFR7 NZ

    Congratulations. You did it, your efforts are not wasted. Lower K band scanning range feature must be in every DFR6/7. I'll ask you some details about the process.
  7. A

    DFR7 Firmware Update 06/27/19 V1.12E

    I need band segmented firmware for dfr7. Like NZ models.
  8. A

    DFR7 - NZ vs USA Firmware Differences?

    My old cheap china detector (20$) detecting speedcam but Dfr7 can't. This is frustration. I think speedcam scans under 24.050Ghz. May be NZ firmware helpfull.
  9. A

    DFR 6/7 users, I need information

    Thanks.
  10. A

    Hello from EU

    I need photo of this part. Thanks.
  11. A

    Hello from EU

    I think its power supply problem, device does not turn on. There was a slight smell of burns. Due to customs problems, it is difficult to send Uniden for repairs. First I will try to repair it in my own country. (Sorry for the big pic)
  12. A

    Hello from EU

    Hi everybody. I read some topics in Rdforum and decided buy a DFR6. But because the short circuit some parts damaged and unfortunately cannot read part numbers. I found some pictures like https://fccid.io/png.php?id=2926808&page=4 But not enough to define part numbers. So I need to...
Top