[P] Discussion related to Blinder laser jammers and Blinder laser jammer accessories.
Put your money on the 905 as we move forward.
Vertical or horizontal Blinders software has your defense covered.
Denmark will never stop making a better mouse trap.
It's been a 14 year ride jump on! There's more coming!
To have good off-axis protection the IR output from the firing diodes has to be wider...not taller. Don't get me wrong, vertical will work in most situations on-axis, but it's not ideal. Off-axis is more of a an issue as performance decreases significantly due to the angle of attack (worse as you approach shooter) and the resulting limitation of the taller diode output.
Also note if the sensors are installed relatively far from headlamps ( more inward to center of vehicle) vertical installs adds to the above issues.
Install your blinders as there were designed to work. If you can't then you are now aware of the limitations.
I hope whatever product is sourced or designed in house the 905 owners will not be left out in the cold as the m27/47 owners were.It's been a 14 year ride jump on! There's more coming!
from my iP5 via Tapa 2
Last edited by mrkookm; 06-28-2013 at 11:41 AM.
if it did it would of said in the manual ...either place horizintal or vertical ...but who im i kidding it also shows us how to set up for off axis poliscan
no i would not mount vertical but there is away around it
tear down the 905 and rotate the diode
I'm just going to buy el cheapo flat black kidney grills and take a dremel to them and build myself a little bracket out of abs.
When what you have works, why update? Yes Blinder is working to make our software better.
When the next update is 100% ready it will be available. Working on a few different things.
Others may update every other week only to fix the bug that was created with their last update.
The mounting can go either way.
Testing horizontal is better side to side. Vertical better top to bottom.
Either way with the Blinder HP 905 your not getting a ticket.
In a cat and mouse game, the mouse has to move fast.
Measures: Kustom Golden Eagle (with a 35.5 antenna)
Counter Measures (Active): Beltronics STi: 2xR+, Magnum, Driver (2006 Build date), RX-65 S7, V1C, Cobra 7800BT
Countermeasure tester? PM me to borrow any of my windshield mount detectors: V1C, Cobra 7800BT RX65 S7, Magnum (no BS-RDR), Driver (with BS/RDR update and wire bonded LNA)